Chapter 10 - Canard

Follow the links below for details on each part of this chapter:

• Step 1 - Trimming the Foam Blocks and Cutting the Cores
• Step 2 - Making Lift Tabs, Inserts, Jigging Cores, Laying up the Shear Web, and Installing Lift Tabs
• Step 3 - Jigging and Bonding the Canard Sections Together
• Step 4 - Spar Cap Layup
• Step 5 - Applying the Bottom Skin
• Step 6 - Installing Hard Foam Blocks for Elevator Hinges, the Upper Spar Cap, and the Upper Skin

Copyright © 2001 Rick Maddy, All Rights Reserved