Chapter 13 - Nose, Nose Gear & Brakes

Follow the links below for details on each part of this chapter:

• Step 1 - Reinforcing the Glass Strut
• Step 2 - Fabrication of NG-30s
• Step 3 - Installing the Worm Drive Assembly
• Step 4 - Installation of the Box Assembly on the Fuselage
• Step 5 - Nose Floor and Sides
• Step 6 - Installing the Rudder Pedals
• Step 7 - Installing Master Brake Cylinders
• Step 8 - Completion of Nosegear
• Step 9 - Piping the Pitot & Static System
• Step 10 - Closing the Top and Carving & Glassing the Outside
• Step 11 - Nose Door

Copyright © 1999 Rick Maddy, All Rights Reserved