Chapter 14 - Center Section Spar

Follow the links below for details on each part of this chapter:

• Step 1 - Centersection Jig
• Step 2 - Assembly of Foam Parts
• Step 3 - Interior Layups
• Step 4 - Install the Forward Face
• Step 5 - Outside Hard Points
• Step 6 - Spar Cap Layup
• Step 7 - Shoulder Harness Blocks and Outside Layups
• Step 8 - Hardpoint Reinforcement
• Step 9 - Access for Wing Attach and End Layup
• Step 10 - Installing in the Fuselage

Copyright © 2001-2002,2006 Rick Maddy, All Rights Reserved