Step 5 | Chapter 18 | Step 7 | Home | Logs | Chapters | Documents | Links |
This step has you install the canopy hinges on the upper longeron.
May 15, 2005. Here is the forward hinge after floxing it into place. I added some clamps and drilled all the holes
while I waited for it to cure.
May 15, 2005. Here is the nutplace being added under the right upper longeron for one of the hinge bolts. This area
ends up inside the shoulder support so you can't get to the nut normally. Since I may want to remove the bolts and
hinge someday, using a nut place here makes that much easier.
May 22, 2005. Here is the forward hinge with all the bolts and nuts in place.
Step 5 | Chapter 18 | Step 7 | Home | Logs | Chapters | Documents | Links |
Copyright © 2005 Rick Maddy, All Rights Reserved