May 26, 2005. Here is the shoulder support after adding the 12 layer BID pads of the hardpoints, adding two layers
of BID overall, and three strips of UNI of each hardpoint.
| Step 2 | Chapter 8 | Step 4 | Home | Logs | Chapters | Documents | Links |
In this step you mount and glass the shoulder support.
May 26, 2005. Here is the shoulder support after adding the 12 layer BID pads of the hardpoints, adding two layers
of BID overall, and three strips of UNI of each hardpoint.
| Step 2 | Chapter 8 | Step 4 | Home | Logs | Chapters | Documents | Links |
Copyright © 2005 Rick Maddy, All Rights Reserved