| Fri 10 |
13
|
Began building nose gear doors. |
3 |
| Sun 12 |
13
|
Glassed nose gear doors and hinges. Cut hole in nose strut cover to fix motor arm. |
4 |
| Mon 13 |
13
|
Cut nose gear doors to size. Removed foam for plywood mounts. Drilled and tapped mounts and doors. |
4 |
| Thu 16 |
19
|
Began tracing wing templates |
1 |
| Wed 22 |
19
|
Finished tracing all the wing templates |
2 |
| Thu 23 |
13
|
Floxed nose gear door mounts into place |
1 |
| Thu 23 |
19
|
Cut all 14" boards for wing jig. Cut airfoil shape in all jig boards. Cut all boards for jig base. |
6 |
| Fri 24 |
13
|
Cleaned up door mounts. Glassed inside edges of gear hole in fuselage bottom. |
1 |
| Fri 24 |
19
|
Built wing jig table. Rough cut all wing templates. |
7 |
| Sat 25 |
13
|
Floxed strut cover into place using jigs to keep shape correct. |
2 |
| Sun 26 |
19
|
Sanded all wing jigs smooth |
3 |
| Thu 30 |
13
|
Installed rudder pedals. Measured for brake cylinders. Made mouting brackets for cylinders. |
2 |
| Fri 31 |
13
|
Installed brake cylinder mounts in nose floor. Floxed nose gear cover into place. |
2 |